Obtaining 16 patens of invention and 58 technical innovations, a brand-new product—AV6481 Optical Fiber Fusion Splicer is launched, thanks to 5 years of painstaking research of 28 engineers.
AV6481 implements industrial-grade CPU+FPGA structure of high-performance, completely fresh HD optical fiber microscope, imported high-speed motor and aluminum-magnesium alloy materials extensively. Compared with AV6471, our star product, AV6481 lowers the size by 38%, the weight by 52%, the power consumption by 57%, but improves the speed by 60%, the environment adaptability by 80% and the reliability (MTBF) by 200%. You can get unprecedented fusion splicing experience.
Precise fiber core alignment, ultra-low fiber fusion splicing consumption
7s fast fusion splicing, 18s highly efficient heating.
320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
300 groups of fusion splicing modes, 100 groups of heating modes
10000 groups of fusion records, 64 images storage
Ceramic presser foot, ceramic V-block, all-in-one fixture
Dual-direction splicing, automatic splicing, intelligent pyrocondensation
USB and SD card interfaces, U-disk automatic software upgrade
Built-in modular lithium battery, supports 220 times of splicing and heating cycles.
Small and light
Small in size and light in weight, the splicer is easy to carry and can be lift by one hand.
Water-resistant, dust-resistant and shock-resistant in design
Water-resistant and dust-resistant can meet IP52 requirements.
The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and rubber-insulted wires with a cladding diameter of 80～150μm.
Graphical interfaces and touch screen
AV6481 uses entirely new GUI graphical interfaces and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.
Intelligent heat shrinkage
A detection unit is embedded in the heater. The heating function will only be enabled when the thermal shrinkage tube is put in the heater, to avoid misoperation.
Large-capacity pluggable lithium battery
The built-in pluggable lithium battery with large capacity can answer working demand lasting all day long (typical 220 times of fusion splicing and heating cycles).
Ceramic V-block and ceramic presser foot
Ceramic V-block with high precision brings you convenient and accurate placement of optical fibers and makes cleanup easy.
Multi-functional carrying case
The multi-functional carrying case is novel in design and light in weight, has built-in compact working bench. Open or close the cover can turn it to a working bench.
||Precise core alignment and cladding alignment
||Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.
|Optical fiber diameter
||Cladding：80～150μm, coating layer: 0.1～3mm
||5～16mm（coated optical fiber diameter≤250μm）；10mm（coated optical fiber diameter：0.25~3mm）
|Fusion splicing consumption（typical value）
||Better than 60dB
|Fusion splicing time (typical value)
|Heating time (typical value)
|Pulling force test
|Thermal shrinkage tube
||60mm, 40mm and a series of thermal shrinkage tubes
||High-performance 4.3 inch LCD
||320 times/88 times
|Fusion splicing record
||11.1V，6400mAh，typical value of fusion splicing and thermal cycle is 220 times
|Battery service life
||Cycle charging times reach 300～500, can be replaced by customers
|Electrode service life
||Typical value is 4000 times, can be replaced by customers
||Built-in lights with high-brightness and wide lighting area
||Temp:-10～50℃；hum: 0～95%RH，height above sea level:0～6000m
||GUI graphical operation interfaces
||AC: AC100～240V，60Hz，0～1.5A；DC: DC10～15V
||USB / SD
||120mm（W）×130mm（H）×154mm（D）（without rubber anti-vibration pad）